Standard Incubators
Chemglass Life Sciences Incubator, 38.6 Cu. Ft., Large Capacity, General Purpose, Reach-In, 120V
Horizontal Air FlowFour Interior Electrical OutletsPre-wired Panel for Chart RecorderTempered Glass Viewing Window24 Month Limited Warranty. The CLS-2441 series incubators provide extra large chamber capacities while minimizing the amount of floor space used. Both models incorporate a microprocessor controller to achieve precise temperature uniformity. A totally independent secondary temperature controller offers the added security of over temperature protection. The chamber floors are ruggedly reinforced to support roller apparatus or shakers. Both models are supplied with (6) reinforced, sturdy shelves to support extra heavy loads. Access ports are available by special order. Applications: Hematological Studies Microbiological Determinations Pharmaceutical Stability Assays General Purpose Incubator Applications Large Scale Roller Apparatus Applications Bacterial Culturing and Research Food Processing Quality Control Biochemical Studies
Electron Microscopy Sciences General Protocol Incubator Model 51028063, 120 V, 75 L chamber
Gravity convection provides gentle air flow and minimal drying out with temperatures at or below ambient: +5 to 75 degree C. The intuitive user interface for setting temperature and large and easy to read vacuum fluorescent display makes operation simple and straight forward operation. Internal glass door allows sample viewing without impacting temperature. Easy to clean, corrosion-resistant stainless-steel interior (AISI 430) a plus.
Chamber: 75 L
Yamato Scientific America, Inc. Yamato 318L Incubator with communication port, General Purpose, 220V
Economical general purpose 318L natural convection incubator with communication port. Dual door system permits contents to be viewed easily without disrupting atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C
Sigma Aldrich Fine Chemicals Biosciences filipin complex ready made
filipin Complex the collective name given to family of isomeric polyene macrolides isolated from cultures of S. filipinensis with filipin III being the majority part of the complex.
Sigma Aldrich Fine Chemicals Biosciences Ribonucleoside vanadyl com
Ribonucleoside vanadyl complexes are stable complexes formed between ribonucleotides. They are low molecular weight inhibitors of cellular ribonucleases (RNases) that are used for the isolation of RNA from cells.
PHCbi Cell-IQ™ Series 5.8 cu.ft. CO2 Laboratory Incubato
The PHCbi Cell-IQ CO2 incubator design and touchscreen panel deliver exceptional ease of use, effortless cleaning and maintenance as well as outstanding performance with multilevel contamination control.The MCO-170AICUVL-PA laboratory incubator is designed for demanding and regulated applications in the biomedical, pharmaceutical, medical research and clinical laboratory applications. The Cell-IQ CO2 incubator offers the ideal environment for all your research needs. The MCO-170AICUVL-PA unit includes a touchscreen control panel that delivers improved usability, an optimized interior structure with technology for rapid cleaning, and a proprietary infrared sensor for stabilizing temperature, CO2, and humidity levels.
Memmert Forced Circulation Incubator IF 110 Plus, 115 volt, 50/60 Hz, maximum temperature range to 80C
Memmert Forced Circulation Incubator IF 110 Plus, 115 volt, 50/60 Hz, maximum temperature range to 80C
Being Scientific BIC-250C - 8.7 Cuft (247 Liters), 14 - 176 ℉ , -10 - 80℃
BEING Cooling Incubators allow users to carry out applications that require temperatures ranging from -10° to +80°C. These incubators are ideal for biochemical oxygen demand (BOD) testing, bacterial research, seed germination, fish/insect breeding and much more. The BEING Cooling Incubator provides accurate and dependable temperature control. Each cooling incubator uses environmentally friendly refrigerants that ensure rapid cooling does not come at the expense of the environment.
Yamato Scientific America, Inc. Yamato 143L Incubator with window, Refrigerant, 115V
Low temperature 143L forced convection incubator applicable for low temperature tests and environmental tests. Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention. Programmable. High accuracy temperature control and temperature distribution. Optional slide shaker table available to put in and take out samples easily. Operating temperature range: -10~ + 50° C
Being Scientific BIC-120C - 4.2 cu ft (120 liters),14 - 176 ℉ , -10 - 80℃
BEING Cooling Incubators allow users to carry out applications that require temperatures ranging from -10° to +80°C. These incubators are ideal for biochemical oxygen demand (BOD) testing, bacterial research, seed germination, fish/insect breeding and much more. The BEING Cooling Incubator provides accurate and dependable temperature control. Each cooling incubator uses environmentally friendly refrigerants that ensure rapid cooling does not come at the expense of the environment.
Electron Microscopy Sciences General Protocol Incubator Model 51028065, 120 V, 194 L chamber
Gravity convection provides gentle air flow and minimal drying out with temperatures at or below ambient: +5 to 75 degree C. The intuitive user interface for setting temperature and large and easy to read vacuum fluorescent display makes operation simple and straight forward operation. Internal glass door allows sample viewing without impacting temperature. Easy to clean, corrosion-resistant stainless-steel interior (AISI 430) a plus.
Chamber: 194 L
Scytek Laboratories SlideMaster, with Humidity Chamber, Two Slide Holders, and Waste Recepticle Components
ScyTek Laboratories, Inc. proudly introduces SlideMaster. A humidity chamber designed by a histotechnologist that eliminates the majority of individual slide handling. SlideMaster has three different parts: A humidity chamber, two individual slide holders with white contrast bars, and a waste receptacle. It has been designed so that all three components are compact and easy to use. A maximum of 20 slides can be used per unit. This is how it works. A hydrophobic barrier (PAP Pen, Catalog #LP0001) is drawn around the tissue section and slides are put in a special slide holder that secures them into place. Drops of antibody are placed on the slides and incubated. After incubation, the individual slide holders can be tilted and secured at a 45 degree angle. All 20 slides are rinsed off in one easy motion and the buffer (PBS-Tween 20, Catalog # ABA125 or TBS-Tween 20, Catalog # TBS125) drains into the waste receptacle. Slides are gently blotted (tissue paper) at the bottom portion